Production Proven, Complex Semiconductor IP Cores

Semiconductor IP Cores


T2M PCI Express PCIe 3.0 Serdes PHY IP in 40LP

PCIe 3.0 Serdes PHY IP in 40LP

Description

This PCIe 3.0 Base Specification-compliant Peripheral Component Interconnect Express Gen3 PHY supports the PIPE 4.3 interface standard. Due to the support of an extra PLL control, reference clock control, and inbuilt power gating control, low power consumption is accomplished. Additionally, because the low power mode option is customizable, the PHY is extensively useful for a variety of settings with diverse power consumption considerations. Utilizing a test bench created in Verilog HDL, NCVerilog simulation software is used to verify PCIe PHY operation.

 

Features
  • Compliant with PCIe 3.0 Base Specification

  • Compliant with PIPE 4.3

  • Supported data transfer rate: 2.5 GT/s, 5.0 GT/s and 8.0 GT/s

  • Supported physical lane width: x4

  • Supported parallel interface: 32-bit

  • Supported input reference clock: 100 MHz

  • Supported parallel interface data clock: 62.5 MHz, 125 MHz, and 250 MHz

  • Supporting low power operation with configurable setting in power state P1/P2/L1 PM Substates:PLL control, reference clock control, and embedded power gating control

  • UMC 40nm LP 1P7M5X1R (HVT/LVT/EHVT) process

  • Operating Voltage: 0.9V, 0.95V, 1.2V and 1.8V

  • Providing robust testability by low-cost Build-In Self-Test (BIST) via near-end analog and external loopback interface as well as far-end analog/digital loopback interface

Deliverables

  • Behavior model, and protected RTL codes

  • Protected Post layout netlist and

  • Standard Delay Format (SDF)

  • Synopsys library (LIB)

  • Frame view (LEF)

  • Metal GDS (GDSII)

  • Test patterns and Test Documentation